Are we heating the outdoors?  

Exquisite Heat adjusts boiler supply from indoor real time heat load data. All building factors of heat loss from windows, wind, sunlight activity, insulation, lighting, occupancy, and individual comfort needs are considered.  For circulating Hot Water boiler systems comfort is assured in all zones, rooms and difficult areas to heat with high rates of circulation of lower temperature water in all radiators. This level of precision and simplicity is available exclusively from Exquisite Heat real time indoor temperature reset technology.

Added life for boilers from less stressful operation is an added economy of operations.  No more broken boiler sections from high temperature difference between the return temperatures and supply temperatures. 

Exquisite Heat assures the difference in delta ( supply-return) temperatures remain well within the 40 degrees recommended by manufacturers.

Since 2012, boiler manufacturers are required to ship hot water boilers with controls for "resetting boiler temperatures for building load".  Most manufactured apply 50 year old outdoor reset control technology as it is the minimum requirement which meets government DOE (Department of Energy) requirements. Outdoor reset does not adjust boiler temperatures to building heat load. it simple uses an outdoor sensor and an estimating curve.  It does not best meet the requirement. Outdoor reset is simply an adjustment of boiler temperature based on the assumption that as temperature outside go down, the boiler needs to produce more heat at a higher temperature. Most Often the outdoor reset curves are not calibrated for the building and operate improperly after installation. There is no analysis process nor data for building heat load. Manufacturers do not require the installer to use the technology. That is one solid proof that neither the manufacturer nor the installers have confidence in outdoor reset technology. It simply makes a more palatable sales presentation.

Exquisite Heat  demonstrates that indoor boiler temperature technology is automatic, more comfortable, accurate and economical method to reset boiler supply temperature, to meet heat load comfort needs at minimum operating cost within the building, without any need to be calibrated for the building.  It is totally automatic. Most outdoor temperature curves are adjusted above the ideal in order to avoid repeat visits by service folks for adjustment.  It is a hit or miss proposition and can be totally ineffective if improperly adjusted. How would the customer know?

Often the featured is inactivated to avoid repeat comfort service calls.
  
It Is Time to Take A Fresh Look at Comfort